Socket & See VIP200
The Socket & see VIP 200 is a 2 pole voltage indicator with continuity, phase rotation and single pole test facility.
The VIP 200 features an Auto Test button to ensure the batteries are in good condition.
Two Pole Voltage Indication
Two pole voltage indication is possible with and without batteries installed. AC/DC selection is automatic.
Single Pole Voltage Test
Batteries must be installed and in good condition. Will detect AC voltages from 100VAC. This value may be impaired under certain conditions e.g use of PPE.
The units LED will illuminate and an audible tone will sound if continuity is present.
Phase rotation can only be determined within a three phase system. Voltage between phases is indicated.
Over voltage Category
LED Indication: 12, 24, 36, 50,120, 230, 400, 600V
LED Resolution: 12, 24, 36, 50,120, 230, 400, 600V
Voltage Detection (ACV / DCV): Automatic
Polarity Detection (DCV): Full Range
Range Detection: Automatic
Response Time: <0.1s LED
Frequency Range: 0 – 400 Hz
Peak Current: 1s <0.3A / Is (5s) <3.5mA
Operation Time: ED = 30sRecovery Time: 10 mins
Auto Power On: < 12V
Operating Conditions: -10ºC to 55ºC, 85% RH
LED Indication: 50 – 110 – 230 – 400V
Batteries: 2 x AAA (LR03)
Dimensions (mm): 300 x 68 x 38Weight: 218g
Prods: GS38 compliant
IP Rating: IP54
Safety Compliance: IEC 61249-3, 61010-1
Interconnecting Cable: Silicone rubber, dual insulated.